Defender

All-In-One Solar Light

The DEFENDER is a medium-duty all-in-one solar light with adjustable-angle LEDs and twin PIR sensors for an extended detection range. A LiFePO4 battery with passive cell balancing and a programmable solar controller support consistent performance.

Suited to pathways, parks and public spaces, with no mains power required.

Download Defender Data Sheet

Category:

Description

Defender all in one solar pathway light

The Defender is a compact, vandal resistant all in one solar light engineered for off grid, all night operation. Solar panel, LiFePO4 battery, controller and adjustable angle CREE LEDs sit in a single 6063-T5 aluminium unit, delivering from 4 W to 36 W and up to 4,558 lumens.

It suits pathways, cycle trails, parks and security lighting, on fixed or temporary installations. Twin PIR sensors detect movement up to 15 m each side of the pole and boost output by 6 W or 19 W, and the LED heads tilt from −40° to +40° to place light where it is needed.

A 32 Wp panel charges a 307.2 Wh LiFePO4 battery, with an optional second 32 Wp panel for partly shaded sites. Advanced Power Scaling (APS) gives an estimated 4 to 8+ nights of autonomy, and a DC output is standard for add on devices.

LEDiL T2 optics are standard, with T3 available, in 4000K, 3000K, 2700K or 590 nm turtle friendly. Each system carries a 5 year complete unit warranty.

Key Features

All in one design. Panel, battery, controller and LEDs in one 711 × 386 × 67 mm unit weighing 14 kg.

Twin PIR sensors. Detection up to 15 m each side of the pole, with a 6 W or 19 W boost; half covers available near roads.

Adjustable LEDs. CREE XP-G3 LEDs with LEDiL optics, tilting from −40° to +40°.

Extra solar when needed. Optional second 32 Wp panel, pole mounted, for partly shaded sites.

Flexible mounting. Single pole, twin head or wall mount; 6 m direct bury or base hinge poles, or a portable ballast block.

Built tough. Textured black TIGER Drylac powder coat, IP66 luminaire with IP68 controller, IK08, with LED and panel stone guards available.

Optional control. Bluetooth module and remote, and a pole mounted on/off switch.

Technical

Lighting
Typical Power / Delivered Lumens (1) 4 W / 776 lm
6 W / 1,165 lm
8 W / 1,387 lm
10 W / 1,734 lm
29 W / 4,313 lm
36 W / 4,558 lm
LED / Efficacy CREE XP-G3, 127–194 lm/W (luminaire)
CRI 70 minimum
Default CCT 4000K
CCT Options 2700K, 3000K, 590 nm Turtle-Friendly
Default Optics (LEDiL) T2
Other Optics (LEDiL) T3
PIR (optional) Twin Panasonic sensors, up to 15 m each side; 30-second trigger; 6 W or 19 W boost
LED Angle Adjustable −40° to +40°
Expected Lifetime 100,000 hours (L90 B10)
Operation
Operating Modes Programmable power profiles (fixed, dusk-to-dawn with PIR boost, dimming)
Bluetooth module and remote, pole-mounted on/off switch (optional)
Ports 1 × DC charging input; 1 × output for add-on devices
Solar & Battery
Solar Panel 1 × 32 Wp monocrystalline; optional second 32 Wp panel (64 Wp total)
Panel Efficiency Rating 21%
Battery Type LiFePO4, 12.8 V, passive cell balancing
Battery Capacity 24 Ah / 307.2 Wh
Life Cycles 2,000–6,000, depending on use and conditions
Charge Controller Programmable smart MPPT with advanced BMS
Estimated Autonomy (APS) (2) 4–8+ nights
Pole & Mounting
Mounting Single pole, twin head (180°) or wall mount; spigot adaptor 60–76 mm
Pole Fitting Adjustable −60° to +60°, integrated 60 mm OD spigot
Pole Options 6 m direct bury or base hinge pole
Portable ballast block (1.0 m or 1.1 m)
Mount Heights 4–6 m
Typical Spacing 10–50 m
Wind Regions A–C (poles); ballast blocks A–C by block size
Design & Compliance
Dimensions 711 × 386 × 67 mm; 14 kg
Material / Finish 6063-T5 aluminium; TIGER Drylac marine-grade powder coat, textured black (RAL 9011)
IP Rating IP66 luminaire / IP68 controller and connectors
IK Rating IK08
Operating Temperature −20 °C to +60 °C
Security Options LED lens stone guard, solar panel stone guard, PIR half covers
Certifications CE, FCC, ANSI C136.31, ISO 9001
Warranty 5-year complete unit warranty

(1) Power and delivered lumens depend on location. (2) Advanced Power Scaling holds a preset brightness through the night and reduces LED power to a safe minimum only if the battery will not last until morning.

FAQ

What is an all in one solar light?

The panel, battery, controller and LEDs are built into one unit, so there is no separate battery box or cabling on the pole.

How does the motion sensing work?

Twin PIR sensors detect movement up to 15 m each side and boost output by 6 W or 19 W for 30 seconds. Half covers narrow the detection field near roads.

What if the site is partly shaded?

An optional second 32 Wp panel mounts on the pole for extra charge.

Can it be mounted on a wall?

Yes. A wall mount adaptor is available, as well as single pole and twin head mounts.

What maintenance does it need?

Very little. Clean the solar panel periodically; the LiFePO4 battery lasts 2,000 to 6,000 cycles depending on use.